Pronar ZKP800

Pronar ZKP 800 is a double rotor rotary rakes with hydraulic regulation of working width from 7 m 8 m and manual lock of required width. Swath width can be set from 0.9 to 1,9 m.

Pronar ZKP 800 is eqiuipped with two rotors with eleven working arms. Each arm ends with four double raking fingers. . Using it is very simple, while ensuring the effectiveness. Turned linkage enables perfect steering of the rake. Lower links enable additional ground following behind the tractor. Rear Turing Wheel of the drwbar improve menoeuvrability.

Tandem axle system of the rotors guarantees correct ground surface cracking and facilitates keeping the required driving route of the rake. Self aligning rotors enable longitudinal and Lateran ground surface cracking.

The rake offers also manual adjustment of raking height and hydraulic synchronized raising and lowering rotors.

Can be used for operations on tractors I and II cat. ZKP 800 power requirement amounts to 59 kW (80 HP), and it weights 1940 kg. The gearbox is lubricated with grease.

700 - 800 cm
1940 Kg.
Eigen gewicht
Aantal armen op rotor
80 PK
Vermogen vanaf
Werkbreedte 700 - 800 cm
Totale Lengte in werk- / transportpositie 5400/5400 mm
Breedte in werk- / transportpositie 7500-8500 mm / 2800 mm
Hoogte in werk- / transportpositie 1450 / 3550-4200 mm
aantal tanden op een arm 4
Aantal rotors 2
Armen op een rotor 11 per rotor
Cat. I en II
Aftakastoerental 540
Gewicht 1940 Kg
Benodigd vermogen Min. 80PK
Aanbevolden snelheid 10 KM/uur
Werkcapaciteit 7 ha/uur
Banden 10.0/75-15.3 en 16×6.5-8 (6PR)